Magisk Module WebsiteTelegram

Solving Zygisk Not Injecting 32-bit Apps

Zygisk Next 不注入32位: Complete Troubleshooting Guide

The Zygisk framework is a very vital aspect of extending functionality for Android enthusiasts through Magisk modules. However, there’s a common problem users usually encounter: Zygisk failing to inject into 32-bit applications. This advanced tutorial addresses the Zygisk Next 不注入32位 issue with actionable solutions that will make everything work seamlessly.

What Is Zygisk and Why Does It Fail with 32-Bit Apps?

Zygisk is a feature of Magisk that deeply integrates into the Zygote process to enable module functionality system-wide. While it works flawlessly for most setups, some users encounter problems with 32-bit applications due to:

Diagnosing Zygisk Not Injecting into 32-Bit Apps

Before jumping into the solutions, let’s diagnose what is causing this. Follow these steps:

  1. Check Magisk Version: Make sure you’re on the latest Magisk version (v27 or higher).
  2. Review Logs: Go through the logs from Magisk to see if there are any errors with injections.
  3. Try Various Applications: Identify whether it’s an application-specific or system issue.
  4. Check Your Architecture: Make sure your device supports running 32-bit apps.

Detailed Steps to Rectify Zygisk Not Injecting into 32-Bit Apps

1. Update Magisk and Zygisk

An older version of Magisk or Zygisk can be a reason for incompatibility. To update:

  1. Start Magisk Manager.
  2. Go to Settings > Check for updates.
  3. Update to the latest available version of Magisk.
  4. Reboot your device and see if the problem is resolved.

2. Properly Configure Zygisk

Perhaps the failure to inject is because of the wrong configuration of Zygisk. For this,

  1. Fire up Magisk Manager.
  2. Enter Settings and ensure Zygisk is enabled.
  3. Tap Configure DenyList, and add 32-bit apps to the DenyList if necessary.
  4. Immediately reboot your device to apply the changes.

**3. Check App Compatibility

Some 32-bit apps are not working because of architecture mismatch with Zygisk. How to confirm:

  1. Check if the app requires or supports your device architecture.
  2. Try a 32-bit variant of the app.
  3. Run CPU-Z or Droid Hardware Info compatibility tests to find out your device architecture.

4. Adjust SELinux Policies

Too strict SELinux policies might block Zygisk from injecting into the application. Here is how to adjust:

  1. Open a terminal emulator or connect your device via ADB.
  2. Execute the following:
    su
    setenforce 0
    
  3. Reboot your device and try injection.

Note: Setting SELinux to permissive mode lowers security. Return to enforcing mode after testing.

5. Reinstall Problematic Apps

If the problem still persists for certain apps, then reinstalling them may fix it:

  1. Uninstall the problematic app.
  2. Clean residual data from /data/data/ and /data/app/.
  3. Reinstall the app and see if Zygisk injects fine.

6. Using a Custom Zygisk Module

Some custom modules that target 32-bit apps will greatly improve compatibility. Popular options include:

7. Edit Bootloader Settings

On rooted devices, bootloader settings may interfere with Zygisk injection. To edit:

  1. Reboot into bootloader mode.
  2. Access your device’s configuration file.
  3. Enable 32-bit app support explicitly if available.

8. Perform a Clean Flash

If all else fails, a clean flash of Magisk and Zygisk may resolve persistent issues:

  1. Uninstall Magisk completely using Magisk Uninstaller.
  2. Reboot into recovery and flash the latest Magisk ZIP.
  3. Re-enable Zygisk and test with 32-bit apps.

Best Practices for Zygisk and 32-Bit Apps

1. Keep Software Updated

Run the latest versions of Magisk, Zygisk, and associated modules at all times to ensure compatibility.

2. Use Reliable Sources

Download applications and modules from reliable sources, such as the Google Play Store or from official repositories.

3. Backup Often

Backup your device before changing anything, using TWRP or a similar tool to avoid data loss.

**4. Keep an Eye on Community Forums

Know from other active community members about known problems and fixes at places like XDA Developers and GitHub discussions, as well as search for issues.

FAQs

1. Why isn’t Zygisk injecting into 32-bit apps?

This is most of the time due to using outdated software, incompatible environment or SELinux denying.

2. How can I enable Zygisk for 32-bit apps?

Make sure Zygisk is enabled in Magisk Manager, also add app in the DenyList if needed.

3. Can SELinux policies block Zygisk injection? Yes, more strict SELinux policies might interfere with Zygisk. Switch to permissive mode temporarily for testing.

4. What if no solution helps?

Flash Magisk and Zygisk clean or ask in the community forums for help.

**5. Is there any danger in changing SELinux policies?

Note: Changing SELinux to permissive mode degrades your device’s security. Use as a temporary troubleshooting step only.

Redirecting in 20 seconds...